Head & Shoulder Moldable cusion for Radiotherapy Patient Positioning
Product Decription:
The moldable cusion provides secure, custom head and neck support for patients. It can be heated in an oven, water bath, or blanket warmer. The low-density thermoplastic based material becomes soft and moldable when heated. They are warm and comfortable, having a calming effect on most patients.
• 100% non-toxic with no pungent odor
• Can be reheated and reshaped
• Increased control of Cervical Spine area with low attenuation
• Comforting and calming patient effect
• Preferred by therapists and clinics worldwide
Preparation Guidelines
1.Heat the Cushion at 75ºC for 10-12 minutes.
2.While the Cushion is heating, preparethe patient for setup.
3.When the cushion is ready, place evenly in the desired position.
4.Position the patient on the cushion andgently press the cushion into the desiredshape to support the patient.
5.0ptional Neoprene strape and velcro canbe used to hold the cushion in place while itcools.
6.Allow the Cushion to fully cool andharden for 15 minutes before moving thepatient.
Send Email
QQ
Whatsapp